Zamieszczam dla potomnych:

Mould King M-0006 - Battery box 4-channel + remote control , digital

• 4 independent channels via radio
  

• remote control needs 2x AAA batteries
  

• Receiver with batteries
  

• 4 digital channels
  

• For each channel the direction can be changed separately
  

• Channels can be connected
  

• Size 4x8 studs, like "standard" battery box
  

Remote control operating instructions

Here is a picture gallery of the explanations below from Mould King

Switch motor rotation direction

Press and hold the keys for 3 seconds. E.g. both A keys then the direction of rotation for channel A is reversed. The same goes for channels B, C and D.

Assign channels to a key

If the left shoulder key is pressed, the channels A,B are merged. If the right shoulder key is pressed, channels A,B,C are merged. The combination can be cancelled by pressing the shoulder keys again. The direction of rotation of the motors must be correct BEFORE merging to a key. If this is incorrect, the combination must be cancelled by pressing the shoulder key. After merging, the direction of rotation of the whole group can be changed. This is done by pressing the two A keys for 3 seconds.

Using a remote control with several battery boxes

Switch on all the battery boxes in the order in which they are to be used. Now switch on the remote control, which should immediately connect to the first battery box that is switched on. The LED of the battery box will now light up continuously and the LED of the remote control will also light up continuously. If the battery box is not connected, the LED flashes.

Now this battery box can be operated normally. The settings for the direction of motor rotation can be programmed.

If the remote control is now switched off and on again, the remote control connects to the next battery box.

So it can be changed with off / on between several boxes further.

Attention: The button merging is not preserved during this process and must be repeated if necessary.